DT315CT/ DT315CT-MD
ENGLISH
4
5
ENGLISH
OPERATION
Powering ON and OFF
To activate the DT315CT/ DT315CT-MD, push and quickly release the Power Button. The
display will come on in a few seconds. To put the DT315CT/ DT315CT-MD in Standby
mode, push and quickly release the Power Button. To turn the DT315CT/ DT315CT-MD
off for extended storage, power off safely using any software function that “shuts down
computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT315CT/ DT315CT-MD when setting up for the
first time to fully charge the internal battery pack. You may charge the external
battery pack with it attached to the DT315CT/ DT315CT-MD, or with the
optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT315CT/
DT315CT-MD a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT315CT/ DT315CT-MD may be configured using the utilities and methods dictated
by the software operating system. The DT315CT/ DT315CT-MD should be configurable
for various properties such as user profiles, network features, and several system
elements.
Calibration
The touch display for the DT315CT/ DT315CT-MD is calibrated before shipping. In the
event that the calibration has been modified or is unsatisfactory, the respective calibra-
tion routines (e.g., PenMount (PM)) to calibrate the touch interface may be used.
Wireless Networking
Wireless LAN
The DT315CT/ DT315CT-MD is often delivered with an embedded (user-inaccessible)
802.11a/b/g/n WLAN adapter equipped with a hidden custom antenna.
T
• hrough the support of typical WLAN adapters, the DT315CT/ DT315CT-MD should
be able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connection.
T
• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT315CT/ DT315CT-
MD and the access points have to match. The SSID is case-sensitive and it is
recommended that you enable WEP/WPA/WPA2 encryption (or advanced alterna-
tives) for secure access.
W
• hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
settings such as Authentication mode, etc.
R
• efer to the access point operating manuals for setting up the 802.11 access points.
