►DO NOT connect to PBX yet
and do not change USB flash content, just insert usb into device
(
If it does not insert, do not force it
simply turn it around then try inserting)
plug the included AC adapter
(110- 240 V AC to 5V DC – do not
use a different power adapter or the unit will be damaged)
▪ Turn ON the speaker
(see picture)
to hear audio from device -
It may take up to 60
seconds before playback starts from USB flash drive - you may
remove the USB drive and re insert it if needed -
You can turn the speaker OFF (middle position) later after you confirm device is playing
▪After you confirmed audio playing from device, connect to your PBX and adjust volume to mid level
(about 12 o'clock -
it turns
between 8 o'clock minimum to 4 o'clock maximum - do not turn it past these levels)
Package Content:
iHold P device
Power adapter 110/240v AC to 5v DC 2000 ma
USB flash Drive or SD card
RCA to RCA audio Cord
User’s Manual
LED :
The front LEDs turns ON Blue to indicate playback.
(Note: LED turns OFF if no audio is detected at power ON)
Connecting to a Computer :
be sure to test the device with unchanged files on the usb flash drive 1st
Remove the USB drive or SD card after you verified it is playing on the device or your phone system and insert it into USB port or
the SD slot normally found on most PC/ laptops, This will be detected as “Removable Disk” , when you open “My Computer” or
“Windows Explorer”
Preparation:
1st copy all files to a new folder in your computer and make sure all 4 folders are saved, then choose
and keep one of the folders
(Generic Music & Messages, Generic Music & Messages Holiday Style, Music Only or Music Only Holiday Style)
on the USB drive and delete the other 3 folders from the USB drive.
You may use your back up copy on your PC to change to desired files based on your needs for example during
Holiday season you copy the Holiday style files and paste them back to USB drive.
Note:
You should use a Windows
based PC
(
this is because the USB stick was created on a windows based PC
for Mac you may need to format the drive before you can
copy /paste files)
Transferring files into USB drive:
Select the file you want to transfer and drag-and-drop it into the “Removable Disk” that represents this device (right click on the
file, copy, move the mouse to the “Removable Disk” , right click there and paste) After all file transfers are done allow
15
seconds
before removing the USB drive.
110 - 240 V
Front
View
Back
View
Min Volume Max
USB drive
SD card slot
Speaker
ON
ON
OFF
P1
PBX MOH port
LED
Be sure to read the README.txt file on the USB flash drive for more info
on file changes and for software utilities.
PBX MOH port
You may turn the speaker OFF (middle position)
at any time after you confirm device is playing
RCA
5V
3.5mm
Stereo
(2 black
rings)
iHold P Advanced Music On Hold Player
rev 35
Mono
(1 black
ring)
RCA to RCA audio cord
(included)
3.5mm to 3.5mm cord
C&E 30S1-01260
or
