DT310CR
ENGLISH
2
The DT310CR
Ba�ery/Power LED
1
2
3
C
G
A
F
F
D
E
B
Bu�on Func�ons
BUTTON ACTION
Power bu�on
Programmable bu�on without the
scanner module
As scanner trigger when equipped
with the scanner module
Ba�ery latch
Input/ Output Ports
Barcode Scanner (op�onal)
Magne�c Stripe Reader (op�onal)
Headphone Jack
USB Port
DC Power Input
Camera (op�onal)
EMC®
Chip-and Signature Card
Reader
(op�onal)
1
2
3
A
B
C
D
E
F
3
ENGLISH
Power/Ba�ery LED Status:
•
Blue indicates the ba�ery is 25% to 100% charged
•
Blinking blue indicates the ba�ery is charging
•
Orange indicates that the ba�ery is between 11% to 25%
•
Blinking Orange indicates that the ba�ery is below 10%
Precau�ons
•
Always exercise care when opera�ng and handling the DT310CR.
• Do NOT apply excessive pressure to the display screen.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT310CR should face away from direct light to reduce glare.
•
If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the
DT310CR and disconnect all power sources. Report the
problem to your device provider immediately.
•
Never a�empt to disassemble the
DT310CR, as this will void the warranty.
THE DT310CR
Basic Features
The DT310CR
wireless tablet integrates a bright and mul�-touch display, one USB port,
and embedded networking elements such as wireless LAN and Bluetooth. The
DT310CR
is complemented by a suite of accessories, including ba�ery expansion, and charging
cradles, for a comprehensive user experience.
A DT310CR
typically integrates an 802.11ac wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT310CR does not come with
such a network adapter, please consult your device provider to establish the desired
network connec�vity.
G
