4
L3
lights
2 flash
x
Functions with F5 jumper:
L2
-
lights
L4
lights
blinking
Stick
Stop
Fwd
lights constantly
L1
lights constantly
L1
Stick
Stop
Fwd
L2
-
lights
Functions with F6 jumper:
L3
-
2 flash
x
L4
lights
blinking
Dimension / Weight - (W):
25 x 15 x 4 mm / 12g / 14g
When the product is no longer in use, return it to a collection point for
recycling.
The board is coated with varnish to protect it against humidity, dust.
TECHNICAL SPECIFICATIONS
Input Voltage:
+5 V connector JR (4V ÷ 8V)
External Battery Voltage:
+4 to +24V.
Operate current consumption:
0,05 ÷ 0,17A (depends on load)
Control (positive pulses):
T = 5÷30ms, t = 1,5ms ± 0,7ms
Ambient Temperature:
-10°C ÷ +40°C
Intended environment
:
housing, business and light industry
OPERATING INSTRUCTIONS AND SAFETY RULES
Read user guide thoroughly and follow its instructions!
Do not exceed maximum voltage rating. Protect your DL4B against
drops, aggressive environment, liquids (line “W” is resistible against
splashing water and snow). Do not connect DL4B to battery when
taking it from cool to hot environment, wait at least for 20 minutes. Do
not look directly into LED light from small distance. Protect your eyes.
Wrong wiring could cause the DL4B damage even its ignition. Check the
wiring before every use. Prevent short-circuit of any wires by proper
insulation. If you discover any defect on the DL4B, please return the
product to your seller with the defect description.
!
Functions with F3 jumper:
L2
-
lights
lights
lights constantly
L1
Stick
Bwd
Neutral
Fwd
L3
-
2 flash
2 flash
x
x
L4
-
blinking
blinking
L4
2 flash constantly
x
Functions with F4 jumper:
Stick
Bwd
Neutral
Fwd
L2
-
lights
lights
lights constantly
L1
L3
blinking constantly
