8
Stand by Current Consumption: c. 0,01A
Output Current L1- L8:
c.20mA
TECHNICAL SPECIFICATIONS
Input Voltage MDL16:
+5 V from connector K1 (4V ÷ 8V)
External Battery Voltage:
+4 to +24V.
Operate current consumption:
0,03 ÷ 0,35A (depends on load)
Signal Protection masks signal los: 0,5s.
Control (positive pulses):
T = 5÷30ms, t = 1,5ms ± 0,7ms
Dimension L x W x H:
29 x 42 x 8 mm
Weight / (W):
12g / 14g
Ambient Temperature:
-10°C ÷ +40°C
The board is coated with varnish to protect it against humidity, dust.
OPERATING INSTRUCTIONS AND SAFETY RULES
Intended environment
:
housing, business and light industry
Read user guide thoroughly and follow its instructions!
Do not exceed maximum voltage rating.
Do not charge battery while connected to DL16B.
Protect your DL16B against drops, aggressive environment, liquids,
splashing water and snow (line “W” is resistible against splashing
water and snow). Do not connect DL16B to battery when taking it from
cool to hot environment, wait at least for 20 minutes.
If you discover any defect on the DL16B, please return the product to
your seller with the defect description.
When the product is no longer in use, return it to a collection point for
recycling.
Do not look directly into LED light from small distance. Protect your
eyes.
Prevent short-circuit of any wires by proper insulation.
Check the wiring before every use.
Wrong wiring could cause the DL16B damage even its ignition.
!