1. Features
Professional two-channel stereo power amplifier
New design, standard chassis, suitable for standard cabinet installation
A series of high-power amplifier arbitrary choice to meet the different needs
Dual channel, mono and BTL bridge three output options for the choice of output mode switch selection
Individual volume control for each channel
4Ω minimum load impedance of stereo working, 8Ωload impedance the minimum of BTL working
With XLR and 6.35mm two kinds of signal input interface, flexible and convenient to use
With short circuit protection, DC protection, power off and a variety of protection and alarm functions
Each channel is equipped with LED working status indication, low noise design
Suitable for a variety of different occasions, language transmission and sound reinforcement.
2. Appearance Description
2.1 Front panel description
MX2000II
SERIES STEREO POWER AMPLIFIERS
POWER
POWER
CLIP
TEMP
SIGNAL
PROT
-3
-6
-28
-22
∞
-16
-12
-9
OdB
-3
-6
-28
-22
∞
-16
-12
-9
OdB
CH A
CH B
1
2
3
4
5
①
Cooling Fan
The machine has cooling windows in left and right side respectively, in order to guarantee the good
ventilation; do not block any of the ventilation when the machine is under operation.
②
Power Switch
“I” for on
，
“O” for off.
③
Channel A volume control knob
（
Input attenuation
）
④
Machine working status indicator
：
TEMP
：
High temperature indicator, the indicator light when under high temperature protection
PROT
：
Protection indicator, DC output protection and short circuit protection, under the two protection
indicator light
SIGNAL
：
Signal indicator, amplifier output instructions. This indicator lights when the amplifier has a signal
output
CLIP
：
Cutting the top of the distortion indicator, when the top of the distortion the indicator light. Please
reduce the gain, to avoid long-term signal cutting to protect the amplifier and speaker equipment
POWER
：
Power indicator, channel A and channel B power indicator
⑤
Channel B volume control knob (input attenuation)
