* Pubic Address System
- 4 -
with the port of "DATA IN" data input
,
and then connect “DATA OUT” in this device with peripherals by series.
The connection method goes as follows:
other peripheral
3.2 Remote Control Operation
The unit accepts PC remote control. Connect the remote link port of the equipment and the corresponding
device link with the network cable port and it will be controlled by the PC. The network cable applies
T568A-T568A network cable, which is as shown as below. Please refer to the PC side software operating
instructions for PC monitoring operation. If you do not need PC-remote monitoring, PC remote control port
doesn’t need connection.
RJ45 port
T-568A should be connected with respective color.
There are 8 colors from left to right
:
Green white, green, orange white, blue
,
Blue and white, orange, brown white, brown
Spring clip
backs to you
Back to
First step
Native or other
peripheral
equipment
Native or other
peripheral
equipment
DATA OUT port from
other devices
Connect the remote
control interfaces of all
machines in series
DATA OUT port from
other devices