DSP ULE Starter Kit Скачать руководство пользователя страница 4

ULE Starter Kit User’s Manual 

Rev1.0 

June 2015 

1.

 

 

 Introduction 

1.1

 

Other Documents 

A.

 

DHX91 DHAN Module Data Sheet (Downloadable from DSP Group Website) 

B.

 

HAN-FUN Protocol (Downloadable from www.ulealliance.org) 

1.2

 

Target Audience 

The  Starter  Kit  and  this  User’s  Manual  are  targeting  those  customers  familiar  with  running  IoT 
applications on a particular microcontroller (with a spare UART Interface!) and now are interested in 
adding  ULE  wireless  connectivity  capability  via  the  DHAN  module.  That  said,  the  DHAN  module 
can  be  used  for  standalone  (single-processor)  applications  and  also  can  interface  with  an  external 
microcontroller via I

2

C or SPI interfaces. If any of these use cases interest you, please don’t hesitate to 

contact  DSP  Group  at  the  link  shown  below.  “Ditto”  for  those  interested  in  developing  new  ULE 
Controller or Gateway devices. We can get you started with these applications as well! 

http://www.dspg.com/dhan-module/ 

1.3

 

Starter Kit Basics: A bit about DECT-ULE 

DECT-ULE uses a star topology. Each DECT-ULE system contains only one device at the hub 

of  the  star.  This  hub  is  typically  the  gateway  to  the WAN.  In  DECT  cordless  this  hub  is  called  the 
Base  Station.  In  the  IoT  context,  the  hub  is  called  a  ULE  Controller.  The  points  of  the  star  are 
traditional DECT cordless handsets and ULE Nodes or Devices – they can be integrated into a single 
system. Thousands of ULE Devices can be associated with a single ULE Controller.  

This Starter Kit incorporates a ULE Controller (BS Device) and a ULE Node (Device). The ULE 

Controller includes a graphical interface for control and status reporting. It does not provide a means 
to  connect  to  the  WAN.  The  Starter  Kit  promotes  development  of  ULE  Node  applications  per  the 
ULE Standard. Once completed and certified, your ULE Node can operate in any setting within range 
of a certified ULE Controller. The ULE Controller is a common element in many gateways and over-
the-top boxes that populate our homes and offices. 

Base Device

Addr=0

Device A

Addr=16

Device B

Addr=17

Device C

Addr=18

 

Figure 

1-1: Star Topology 

 

 

Содержание ULE Starter Kit


















Отзывы: