DSP SEED-XDS560v2, Руководство пользователя

Страница: 29 / 32

28
Chapter 4
Cautions when using SEED-XDS560v2
1. Do not plug or unplug emulator JTAG cable when it is working
2. When using the configuration tools, it is necessary to use USB cable to connect XDS560v2
with the computer;
3. When configuring network IP of the emulator, ensure that the emulator’s IP and the
computer’s IP are in the same network segment;
4. If you have modified IP, you must restart the emulator to make it work normal.
5. When removing the emulator, to protect the cable working normally, please note that do not
strain the JTAG cable or pull it hard.
6. Please connect JTAG cable in a right way, otherwise it will lead the emulator or target system
broken. In order to prevent you from plugging wrong port, the six pin in JTAG has been
blocked.