DSP SEED-XDS560v2, Руководство пользователя

Страница: 25 / 32

24
3.2 Network Debug
Before debugging by network, you must configure network IP for the emulator, the
configuration tool locates at: ..\ccsv4\common\uscif\SEEDXDS560V2_Config.exe
Set static IP Address, for detailed step please refer to the document on CD ROM
“SEED-XDS560v2 Configuration Tools Users' Guide”
3.3.1 Hardware connection
1. Connect SEED-XDS560v2 to PC with the USB cable (If the IP has been configured already,
you can also don’t use the USB cable)
2. Connect SEED-XDS560v2 to PC with the Ethernet cable.
3. Plug the end of emulator’s JTAG into the board’s JTAG.
4. Power the emulator with 5V-POWER, the COM-LED3 turns green, then the emulator is
uploading programme.
5. Please wait until COM-LED3 off and COM-LED1 & COM-LED2 turn red
6. Power the board.
3.3.2 Software debugging
1 Launch CCS4.2.3, choose“Target\New Target Configuration”;
2 You can use the default file name, or rename it by yourself. Click “Finish” ;