Page 2 of 2
Although diligent care has been used to ensure that the information provided herein is accurate, nothing contained herein can be construed to
imply any representation or warranty for which we assume legal responsibility, including without limitation any warranties as to the accuracy,
currency or completeness of this information or of non-infringement of third party intellectual property rights. The content of this document
is subject to change without further notice. This document is non-controlled and will not be automatically replaced when changed. Please
contact us for the latest version of this document or for further information. Since the user’s product formulations, specifi
c use applications
and conditions of use are beyond our control, we make no warranty or representation regarding the results which may be obtained by the
user. It shall be the responsibility of the user to determine the suitability of our products for the user’s specific purpose
s and the legal status
for the user’s intended use of ou
r products.
Testing of the real temperature of the Delvotest
®
Incubator
After calibration set temperature at 80°C for 20 minutes and read the block temperature using a thermos sensor.
The temperature should be +/- 0.3°C
(note: The Delvotest® Incubator
has been tested for 72 hours at elevated temperature of which 10 hours at 80°C
and the remaining 62 hours at 40°C)