Installation (continued)
6
□
Place the fixture body (A) over the outlet box, and ensure the
heads of the support screws (long) (CC) come through the
holes of the canopy of the fixture body (A).
□
Tighten the cap nuts (GG) onto the protruding support screws
(long) (CC) on the mounting bracket (AA) until the canopy
assembly (A) is held firmly against the wall.
□
Place the glass shade (D) over the socket, align the holes of the
glass shade (D) with the holes of the cap of the fixture body (A),
then secure the glass shade with the rubber washers (B) and
the thumbscrews (C) as shown on the diagram.
4
Assembling the fixture body to the
outlet box
5
Installing the glass shades
A
A
A
B
C
D
GG
CC
AA
□
Install the light bulb (not included) into the socket. Use one 60-watt
medium base (E26) type “ST64” bulb (recommended).
6
Installing the light bulbs
NOTE:
You can also use one 60-watt maximum medium
base (E26) type “A” bulbs or 9W maximum medium base (E26)
LED vintage Edison bulb (sold separately). Do not exceed the
recommended wattage.
