17
GB
• If you wish to turn the sound off, press on the remote control. The red and white
indicators will light at the same time. Press again or press VOL +/– on the unit or
on the remote control to resume normal listening. Then the corresponding volume
indicator will light for 3 seconds and turn off.
Adjusting the Subwoofer and Treble Volume Level
Press BASS + / – repeatedly to adjust the bass volume level from BASS MIN (–12) to BASS
MAX (12), each press will increase or decrease 2 levels.
Press / – repeatedly to adjust the treble volume level from TREBLE MIN (–12) to
TREBLE MAX (12), each press will increase or decrease 2 levels.
1. Level -12, -10, -8: the white, amber and green indicators light.
2. Level -6, -4, -2: the amber and green indicators light.
3. Level 0: the green indicator lights.
4. Level 2, 4, 6: the green and blue indicators light.
5. Level 8, 10, 12: the green, blue and red indicators light.
When input signal cannot be decoded (e.g. Dolby, DTS Studio Sound I etc.), the unit is mute and the
corresponding mode indicators will blink rapidly.
AUX / Coaxial / Optical / HDMI Operation
There are COAXIAL / OPTICAL / AUX and HDMI sockets located at the rear of the unit.
Analogue audio sound signals from other sources can be connected to the unit through
these sockets.
1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in the On mode, press SOURCE on the unit repeatedly to select between AUX,
BT (
Bluetooth®
), COAXIAL, OPTICAL and HDMI (ARC) mode.
3. Operate your audio device directly for playback features.
Alternatively,
• press AUX on the remote control to select AUX mode.
• press OPTICAL on the remote control to select OPTICAL mode.
• press COAX on the remote control to select COAXIAL mode.
• press HDMI OUT (ARC) on the remote control to select HDMI OUT (ARC) mode.
• Press on the remote control to select BT (
Bluetooth®
) mode directly.
TH-D437H_IB_Final200915V5.indd 17
16/9/2020 3:28 PM
