background image

INSTALLATION MANUAL

IP CAMERAS SPEED DOME SERIES RL 

Page:

 34   

Page:

 34   

DSE SRL - ITALY - WWW.DSE.EU 

In this window you define the video streaming features that you want to receive from the camera 

STREAM TYPE

 - The camera is able to manage 3 video streams. In this box you decide which video streaming in the browser to 

STREAM TYPE

 - The camera is able to manage 3 video streams. In this box you decide which video streaming in the browser to 

receive between 3 available:  

- Main stream - And 'the main video stream normally used in connection to the internal network 

- Sub stream - It 'a video stream lighter to use with low bandwidth available, 

for example via the Internet 

- MJPEG - Video Stream high quality and least compression for special purposes only network 

internal 

The characteristics of these streams are defined in the configuration. In this window you choose which to use for the current 

connection. As a rule should choose the main stream of the local network and the sub stream via the Internet

VIDEO SIZE

 - Define the size of the live window. Recommended AUTO or 1/1 (Original size). small size of the window, however, are 

VIDEO SIZE

 - Define the size of the live window. Recommended AUTO or 1/1 (Original size). small size of the window, however, are 

available 1 / 2x 1 / 4x or full screen (FULL).

PLAY MODE

 - Choosing live streaming faithfully follow the pre-defined settings. Choosing Smooth will adapt to bandwidth availability to 

PLAY MODE

 - Choosing live streaming faithfully follow the pre-defined settings. Choosing Smooth will adapt to bandwidth availability to 

maintain smooth video.

COLOR MODE

 - Speaker lightly on the live video performance by balancing colors in shades FRESH (bright tones), and 

COLOR MODE

 - Speaker lightly on the live video performance by balancing colors in shades FRESH (bright tones), and 

STANDARD COLD (cold colors) 

Содержание NAKED RL Series


























































Отзывы: