DSE DSE7110 MKII, Руководство оператора

Страница: 8 / 100

Introduction
8
2 INTRODUCTION
This document details the installation and operation requirements of the DSE7110 MKII &
DSE7120 MKII
modules, part of the DSE Genset ® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the
product is passed or supplied to another party, ensure that this document is passed to them for
reference purposes.
This is not a
controlled document. You will not be automatically informed of updates. Any future
updates of this document will be included on the DSE website at www.deepseaplc.com
The DSE7xxx series
is designed to provide differing levels of functionality across a common
platform. This allows the generator OEM greater flexibility in the choice of controller to use for a
specific application.
The DSE71xx MKII series module has been designed to allow the operator to start and stop the
generator, and if required, transfer the load to the generator either manually or automatically.
Additionally, the DSE7120 MKII automatically starts and stops the generator set depending upon the
status of the mains (utility) supply.
The user also has the facility to view the system operating parameters via the LCD display.
The DSE71xx MKII module monitors the engine, indicating the operational status and fault
conditions, automatically shutting down the engine and giving a true first up fault condition of an
engine failure by the LCD display.
The powerful ARM microprocessor contained within the module allows for incorporation of a range of
complex features:
•
Icon based LCD display
•
True RMS Voltage
•
Current and Power monitoring
•
USB Communications
• Engine parameter monitoring.
•
Fully configurable inputs for use as alarms or a range of different functions.
•
Engine ECU interface to electronic engines .
Using a PC and the DSE Configuration Suite software allows alteration of selected operational
sequences, timers, alarms and operational sequences. Additionally, the module’s integral front panel
configuration editor allows adjustment of this information.
A robust plastic case designed for front panel mounting houses the module. Connections are via
locking plug and sockets.
Access to critical operational sequences and timers for use by qualified engineers, can be protected
by a security code. Module access can also be protected by PIN code. Selected parameters can be
changed from the module’s front panel.
The module is housed in a robust plastic case suitable for panel mounting. Connections to the
module are via locking plug and sockets.