Document: DK-V2-4K 2A2
Page: 5
USER MANUAL
DK-V2-4K Dash Cam Car Camera
DSE srl - Digital Surveillance Equipment - www.dse.eu
2 - CONNECT THE PHONE TO THE WIFI
Search with your mobile phone for the camera network
and connect to its wifi with the password 12345678. If
your mobile warns you that this connection does not have
access to the Internet, choose to keep it.
3 - USE THE APP WITH YOUR DASHCAM
Now launch the UCAM app. With the app you can control
the framing of the two cameras, and configure all the
operating options. You can also play the recorded videos
and download them to your phone.
GPS
This device includes a GPS to locate the position. GPS
coordinates can also be superimposed on the video if this
is selected in the configuration.
If you play the videos with the gpsplayer you will be able
to see the location map together with the video.
For the GPS to work, the dashcam must be placed in the
car and in free air. Furthermore, it is necessary to wait at
least 1 minute for the signal to be hooked up. The
function of the GPS cannot be tested indoors.
Settings
To set the dashcam options, enter the setup menu by
briefly pressing the M button
RESOLUTION - Set the video resolution of the recording.
There are 2 options: Front 2160P + Rear 1080P, Front
1440P + Rear 1080P
AUDIO - Enable audio recording
DATE STAMP - Enable the date and time stamp
LOOP RECORDING - Enables continuous recording so the
camera, once the memory has run out, continues to
record overwriting the oldest files. You can define the
duration of the individual video files (1,3,5 minutes).
G-SENSOR - Here you enable the collision sensor (G-
SENSOR) which detects impacts to the vehicle. This
sensor is used to detect when the vehicle has been hit and
automatically protect video files from overwriting. You can
set the sensitivity Low, Medium and High. Default: OFF
FATIGUE DRIVING - Here you enable a warning that the
camera emits after 1,2,3,4 hours of continuous operation.
It can be used to warn you that you have been driving for
too long and you need a stop.
SPEED STAMP - Enables the overlay of the speed detected
by the GPS
GPS STAMP - Enable the overlay of GPS coordinates
SPEED UNIT - Choose the speed unit of measurement
GPS INFO - Show gps information
REARCAMFLIP - Reverses the rear view camera image to
simulate the view in the rear view mirror.
APP - Show the QR code to download the UCAM app
WIFI - Turn wifi on and off (like button up)
LANGUAGE - Set the menu language (including Italian)
TIME FORMAT - Sets the 12 or 24H time format
DATE / TIME - Set date and time
TIME ZONE - Set the time zone: In Italy GMT + 1
FREQUENCY - Set the refresh rate to 50 or 60Hz
CLICKTONE - Enables sound when pressing keys
SCREENSAVER - Activates automatic screen shutdown
after 10, 30 or 120 seconds of inactivity. Note that this
feature only turns off the screen while the dashcam
continues to run. It is very important to enable this
function if you keep the camera running while parking to
reduce consumption.
PARKING MONITOR - This function can only be used if the
camera is used with the installation kit for the fuse box
and if both the BAT + and ACC connectors are connected
(see next chapter)
DEFAULT SETTING - Restore factory settings
VERSION - Shows the product version
Parking monitor
If you have connected the camera to the fuse box using
our installation kit and connecting both connectors (BAT +
/ ACC) you can use the camera for surveillance while
parking.
This function is enabled in the configuration menu, under
PARKING MONITORING.
There are two ways:
