Note:
This feature affects only the text on the Classic (square) button home page.
Perform a Firmware Upgrade
1.
Insert an SD card in the HS2TCHP with the new firmware.
2.
Press Options, Installer Menu [Installer Code], Keypad Programming, then Firm-
ware Upgrade.
3.
Select OK to perform a firmware upgrade (if a new firmware version is available).
Keypad Programming
To enter keypad programming:
1.
Press Options then Keypad Mode. The virtual keypad is displayed.
2.
Press [*][8][Installer Code].
3.
Enter one of the following keypad programming sections:
l
[860] Keypad Slot Number. This section is for display only.
l
[861]-[876] to program keypads 1-16 respectively.
Once a keypad is selected, the following programming options are available:
[000] Keypad Partition Mask
Valid entries are 00-08.
|___|___|
[011] Keypad Input/Output Programming
Zone or PGM Number
Default 000
I___I___I___I
[012] Local PGM Output Pulse Activation Time
I___I___I
Minutes (00-99)
I___I___I
Seconds (00-99)
[021] First Keypad Options
Default Value Option
ON
Off
ON
I__I
1
Fire Key Enabled
Fire Key Disabled
ON
I__I
2
Medical Key Enabled
Medical Key Disabled
ON
I__I
3
Panic Key Enabled
Panic Key Disabled
ON
I__I
4
Display Access Code When Pro-
gramming
Display Xs When Programming Access
Codes
[022] Second Keypad Options
Default Value Option
ON
Off
ON
I__I
1
Local Clock Display ON
Local Clock Display OFF
OFF
I__I
2
Local Clock Displays 24-hr
Clock Displays AM/PM
ON
I__I
3
Auto Alarm Mem Scroll ON
Auto Alarm Mem Scroll OFF
ON
I__I
4
For Future Use
For Future Use
OFF
I__I
5
Power LED Enabled
Power LED Disabled
ON
I__I
6
Power LED Indicates AC Present ON Power LED Indicates AC Present OFF
ON
I__I
7
Alarms Displayed While Armed
Alarms Not Displayed While Armed
OFF
I__I
8
Auto-Scroll Open Zones ON
Auto-Scroll Open Zones OFF
Note:
For UL/ULC installations, bit 5 (Power LED) and bit 6 (Power LED Indicates AC Present)
shallbe ON.
[023] Third Keypad Options
Default Value Option
ON
Off
OFF
I__I
1
Armed LED Power Save
Armed LED Off in Sleep Mode
ON
I__I
2
Keypad Status Shows Stay Arm
Keypad Status Shows Stay/Away Arm
OFF
I__I
3
5th Terminal is Keypad PGM Output 5th Terminal is Keypad Zone Input
ON
I__I
4
Prox tag will arm/disarm
Prox tag does not arm/disarm
OFF
I__I
7
Local Display of Temperature
No Local Display of Temperature
OFF
I__I
8
Low Temperature Warning Enabled Low Temperature Warning Disabled
[030] Download LCD Messages
I___I___I___I___I___I___I___I___I___I___I___I___I___I ___I
I___I___I___I___I___I___I___I___I___I___I___I___I___I ___I
[031] Download LCD Message Duration
Default: 000 I___I___I___I
(Valid entries are 000-255, 000=Unlimited Msg Display) This number represents the number
of times the downloaded message must be cleared before it is permanently removed. This
message can be cleared by pressing any key.
[041] Indoor Temperature Zone Assignment
Default: 000 I___I___I___I
(Valid entries are 000-128)
[042] Outdoor Temperature Zone Assignment
Default: 000 I___I___I___I
(Valid entries are 000-128)
[101] - [228] Door Chime for Zones 1 - 128
The keypad can be programmed to make up to four different chime sounds for individual
zones (e.g., for Zone 1, enter section [101], for Zone 2 enter section [102]).
Default: 01 I___I___I
Valid Entries
01
6 Beeps
02
Bing-Bing tone
03
Ding-Dong tone
04
Alarm tone (4 second duration)
05
Zone name
[991] Reset Keypad Programming to Factory Defaults
1.
Press [*][8][Installer Code].
2.
Enter [991].
3.
Use the [<][>] keys to scroll to the applicable keypad.
4.
Press [*] to select the keypad.
5.
Re-enter [Installer Code].
6.
Press [*] to reset the selected keypad to factory defaults.
