DSC LCD55O1Z32-433, Руководство по установке

Страница: 9 / 32

7
1. Enter [*][8][Installer’s code]
2. Enter [000] to go to keypad programming
3. Enter section [6].
4. To turn the options on or off, press [6] or [7]:
[6] ON = Door Chime Enabled for Zone Openings
OFF = Door Chime Disabled for Zone Openings
[7] ON = Door Chime Enabled for Zone Closings
OFF = Door Chime Disabled for Zone Closings
5. When you are finished, press [#] to exit.
Door Chime Sounds
You can program the LCD5501Z32-433 keypad to make different door chime sounds
for individual zones, or groups of zones. Each LCD5501Z32-433 keypad can make
any of four door chime sounds for each zone that triggers the door chime:
· 4 quick beeps (default sound)
· ‘Bing – Bing’ tone
· ‘Ding – Dong’ tone
· ‘Alarm’ tone
NOTE: For a zone to be able to trigger the door chime sound, the Door Chime zone
attribute must also be enabled in the control panel programming. Please see your control
panel Installation Manual.
To change the door chime sounds:
1. Enter [*][8][Installer’s code].
2. Enter [*] to go to door chime sound programming.
3. Enter a 2-digit number for the zone you want to program [01] - [32].
4. Turn one of the following options on by pressing [1], [2], [3], or [4]:
[1] 4 quick beeps (default sound)
[2] ‘Bing – Bing’ tone
[3] ‘Ding – Dong’ tone
[4] ‘Alarm’ tone
NOTE: Make sure that only one of the above options is turned on. If more than one is on,
the keypad will sound the first option that is enabled. If none of the options are selected,
the keypad will not make any sound when the zone is opened or closed.
5. To program the door chime sound for another zone, repeat steps 3 and 4.
6. When you are finished programming the door chime sounds, press [#] to exit.
K E Y P A D P R O G R A M M I N G