DSC LCD55O1Z32-433, Руководство по установке

Страница: 16 / 32

14
O T H E R P R O G R A M M I N G To restore the PC5132 programming to the factory default settings, perform the
following:
1. Enter [
✱
][8] [Installer’s Code].
2. Enter programming section [996].
3. Enter the Installer’s Code, followed by [996] again. Press [#]. The software for the
receiver section will be restored to its factory default settings.
4. Press [#] to exit Installer Programming. After a software default, you must exit and
then re-enter Installer Programming before attempting to program the receiver
section.
For instructions on restoring the default programming of the control panel or any other
connected module, see your system
Installation Manual
.
O T H E R P R O G R A M M I N G