DSC GS3055-IG, Руководство пользователя

Страница: 4 / 32

4
GS3055-I
G
INTRODUCTION
The device is a backup wireless communicator that sends alarm system information to a System III or System II receiver through a GSM/
GPRS wireless network. The device is available in two models that are different for the operating frequency only:
GS3055-IG = 850/1900 MHz
GS3055-IGW = 900/1800 MHz.
This manual provides programming and operating instructions for both the device GSM/GPRS alarm communicators. Information relating
to a specific model will be denoted by the applicable model number within the text. The term "Device" is used to describe functionality that
is applicable to both models.
, , , , ,
This Device is fixed and shall be installed by Service Persons only (service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed
in performing a task and of measures to minimize the risks to that person or other persons). It shall be installed and
used within an environment that provides the pollution degree max 2, over voltages category II, in non-hazardous,
indoor locations only. This manual shall be used with the Installation Manual of the alarm control panel. All instructions
specified within that manual must be observed.
FEATURES
Technical Specifications
The input voltage to this Device can be drawn from the Control Panel or provided by an external power supply rated for the application.
ˆ
Simulates land line
ˆ
Switches automatically to GSM Network in the event
land line trouble (line down)
ˆ
Manages and signals Incoming/Outgoing calls
ˆ
GSM signal indicator
ˆ
4 programmable OC Outputs
ˆ
Houses 12 V / 1.2 Ah battery (optional)
ˆ
Tamper protection contact
ˆ
Land line overvoltage protection
ˆ
Dual-Band
ˆ
4 Input Lines
ˆ
SMS Alerts
ˆ
Supports Contact ID communication format from a connected control
panel for communication over the GPRS network
ˆ
GPRS/Internet communication with Sur-Gard System III / II
ˆ
13 SMS Messages (2 messages per Input Line and 5 Status
messages)
ˆ
8 phone numbers (max. 20 digits) programmable for SMS Dialer
ˆ
4 phone numbers programmable for Contact ID Dialer
ˆ
Up to 95 phone numbers (max. 20 digits) can be programmed to
manage remote control of the OC Outputs
ˆ
Remote control of the OC Outputs via SMS and/or over-the-phone
after caller recognition
ˆ
Pay-As-You-Go Balance message (for pre-paid SIM Cards)
HV U W R
WR H V ! UH R " DW #$ W %& W '
R ! U D H $ V D ( R & HU V !$ HV )
"* + 3 ,-.. D ( WHU D $# DWWHU %
UH /! UH () RU "* + 3 ,- 1 )
VHD $ H (0 UH ' DU 1 HD #$ H W % H 0 UDWH ( 2 *'
"*
"*
D 3 D $ D #$ H 0 R H R $$ H WRU W % H V & W ' H (
WR 1 UR !(0 UDWH ( "*
! 2 456 2 456
(7
"#$ " 8 W ) R 8 RD 9 D #$ H
# %&'
(
: R '"
# '(
WR ;.
)
9 9 ""2 9 9 '
*&%& 12 R 6