13
Example 2
2
2
2
2: Sprinkler mode. Automation item 1 is
assigned to the sprinkler system. Item 1 is programmed
to follow schedule 1, which activates from 1:00 am to
3:00 am every day of the week. Automation item 1 is
also assigned to the Sprinkler mode. If Sprinkler mode
is on, the sprinklers will turn on from 1:00am to 3:00am
every day.
On rainy days the user can turn off Sprinkler mode to
prevent the sprinklers from coming on. When the
weather clears the user can turn on Sprinkler mode
again to have the sprinklers turn on following the
schedule.
NOTE:
If you assign an item to more than one mode,
the item follows its assigned schedules when any
of its assigned modes are ON. To prevent an item
assigned to more than one mode from following
any of its assigned schedules, ALL the modes
assigned to the item must be turned OFF.
[134]
Automation Item 1:
Schedule / Output Condition
Enter a 2-digit number to determine how the
automation item will operate.
(00) Manual User Control Only:
Users can control the
item only through the [*][5] command (if section [131],
option [02] is ON). The item will not follow schedules
or output assignments.
(01) Follows Programmable Output Only:
The item
will follow the state of its assigned programmable
output option. See Assigning Items to Programmable
Outputs below.
Example:
Item 1 controls a light. If item 1 is assigned
to programmable output option (07) Inverted Arm
Status, the light will be on when the system is
disarmed, and off when the system is armed.
(02) Follows Schedule Only:
The item will follow the
state of its assigned schedules. See Schedule Assignment
on previous page.
Example:
Item 1 controls a light. If item 1 is assigned
to schedule 3, which activates at 19:00 and de-activates
at 22:00 every day, the light will turn on at 7:00pm
and off at 10:00pm every day.
(03) Follows Schedule or Programmable Output:
The
item activates when its assigned schedules and
assigned mode are active. The item will also activate
when its assigned programmable output is active. If
the schedules and the output are active at the same
time, the item will also be active. See Schedule
Assignment and Assigning Items to Programmable
Outputs.
Example
Example
Example
Example
Example: Item 1 controls a light. Item 1 is assigned to
schedule 3, which activates at 19:00 and de-activates
at 22:00 every day, and to the programmable output
option (07) Inverted Arm Status. Any time the system
is disarmed, the light will be on. The light will also be
on between 7:00pm and 10:00pm every day. If the
system is armed between 7:00pm and 10:00pm, the light
will turn on.
(04) Follows Schedule and Programmable Output:
The item activates only when its assigned schedules
are active at the same time as the assigned
programmable output is active. See Schedule
Assignment and Assigning Items to Programmable
Outputs.
Example
Example
Example
Example
Example: Item 1 controls a light. Item 1 is assigned to
schedule 3, which activates at 19:00 and de-activates
at 22:00 every day, and to the programmable output
option (07) Inverted Arm Status. If the system is
disarmed between 7:00pm and 10:00pm, the light will
be on during that time. If the system is armed between
7:00pm and 10:00pm, the light will not turn on.
NOTE
: Program Automation Items 2 through 32 in
sections [135] - [289] in the same manner as
Automation Item 1 (refer to sections [130]-[134] and
the Programming Worksheets for programming
instructions).
firealarmresources.com
Содержание COMMUNIQUE VPM4580
Страница 5: ...Hook Up Diagram iii firealarmresources com...
