DSA Phono III Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 41

background image

DYNAMIC SOUNDS ASSOCIATES Phono III

Page 25 of 38

USER MANUAL

WARRANTY

All DSA products carry a three (3) year warranty against defects in material, components, and
workmanship. This warranty also includes the balance adjustments described in Section 5.0, if
required, during the first year of service. This warranty becomes effective on the date of
purchase, or the date of shipping, whichever is later. To ensure proper registration of the product,
and to validate the warranty, it is necessary to return the warranty registration card below. (This
card may be scanned and e-mailed to

[email protected]

if preferred.) Under the

terms of the warranty, repairs and/or adjustments will be made at manufacturer’s cost, including
return shipping to the user during the warranty period. The user is responsible for shipping costs
to the manufacturer for warranty repairs. Charges for unauthorized service and shipping are not
covered under this warranty. This warranty is null and void where it is apparent that misuse,
accident, neglect, and tampering with or modifications by other than DSA have damaged the
product. The warrantor assumes no liability for property damage or any other incidental or
consequential damage whatsoever which may result from a failure or misuse of this product.

Prior to returning any product for warranty repairs, or adjustments, it is necessary to obtain
return authorization from DSA. You must obtain authorization by sending an e-mail to

[email protected]

. Identify the product, the serial number and provide a brief

description of the problem with the product. You will receive authorization by return e-mail.

DETACH THIS PORTION AND SEND TO DSA TO COMPLETE REGISTRATION

Dynamic Sounds Associates, LLC.
1754 Persimmon Ct.
Naples, FL 34109

MODEL___________________________ SERIAL No. _________________________

PURCHASE/SHIPPING DATE _____________________________________________

NAME OF OWNER ______________________________________________________

ADDRESS ______________________________________________________________

CITY, STATE, COUNTRY, ZIP ____________________________________________

TELEPHONE No. ________________________________________________________

E-MAIL ________________________________________________________________

«
...
26
27
28
29
30
...
»

Содержание Phono III










































Отзывы:

Нет отзывов

Похожие инструкции для Phono III

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды