STEP BY STEP CHARGING STAGE MODE
Note: If you have more than one batter
y
, add the capacity of all and then select the nearest value.
Step 1:
Press MODE selector until LED CHARGING STAGE lights up
Step 3:
Connect the Red (+) and Black (-) clamps on the batter y poles;
Step 2:
Press VOLTAGE / BATTERY selector and select the capacity of the batter y to be charged or
the nearest value
Note 2: For recovery of exhausted batteries, it is recommended to leave the power on for an
additional 24 hours after the full charge indication LED is lit. (Phase 3 pulsating charge will be
reactivating the batter y).
Note 3: The charger can be constantly connected to the batter y without any damage to it.
Note 1: Phase 1, 2 and 3 LEDs indicate which phase the charging is in.
Note 4: If the full charge indication LED does not light up, it means that the batter y cell may be
shorted and impossible to recover.
Step 4:
The batter y will be fully charged when the FULL CHARGE led lights up.
Charges the batter y in 3 phases (lif t, absorption, equalization). Ideal for recharging / recharging
the batteries when they are low, thus obtaining maximum efficiency without wearing, which
increases the life of the battery.
CHARGING STAGE OPERATION DESCRIPTION:
Содержание BC60LP
Страница 1: ...BATTERY CHARGING STATION...
