DS JB.lab T2, Руководство по эксплуатации

Страница: 5 / 40

ENGLISH
05 EN
FRONT PANEL
TO DETACH THE FRONT PANEL
1. To remove the front panel from the unit chassis. press this key
to release the front panel from the unit chassis. then pull it up a little
to take out from the unit chassis.
TO INSTALL THE FRONT PANEL
1. To attach the removable faceplate. insert left side of the face-
plate into the left of the chassis into the chassis until you hear it
“Click”.
PRECAUTIONS WHEN HANDLING
1. Do not drop the front panel.
2. Do not put pressure on the display or control buttons when de
taching or re-installing the front panel.
3. Do not touch the contacts on the front panel or on the main unit
body. It may result in poor electrical contact.
4. If any dirt or foreign substances adhered on the contacts, they
can be removed with a clean and dry cloth.
5. Do not expose the front panel to high temperatures or direct
sunlight in anywhere.
6. Keep away any volatile agents (e.g. benzene, thinner, or insecti
cides) from touching the surface of the front panel.
7. Do not attempt to disassemble the front panel.
SPECIFIATION
GENERAL
Supply Voltage : DC 12V. Negative Ground
Supply Voltage : Max. 10A
Current Consumption : 70watts x 4
Number of channels : 2 stereo channels
Unit Dimensions : 178[W] x 101.5[D] x 50[H] mm
RADIO
For 2 Bands
(Asia)
FM
Frequency Range : 87.5MHz - 108.0MHz
Effective sensitivity : 3uV
I.F Frequency : 450KHz
AM
Frequency Coverage : 522 to 1620 kHz
Effective Sensitivity : 40 dB
I.F Frequency : 450KHz
RCA LINE OUT
Output : 1200mv @ MAX
MMC/SD or USB
Frequency characteristics : 20Hz-100Hz <=5dB
10KHz-20KHz<=5dB
Signal to noise : 50dB [1KHz]
Release button Rele