DS JB.lab T2, Руководство по эксплуатации

Страница: 10 / 40

back of the SD/MMC card or USB stick.
Press again to resume normal playback.
Press the INT button to play the first 10 seconds part
of each track, and the LCD will display INT ON.
Press again to stop scan, while the currently selected
track will be played, and the LCD will display INT OFF.
Press the RPT button to play the current track repeat-
edly, and the LCD will display RPT ONE.
Press again to cancel this function, and the LCD will
display RPT OFF.
Press the RPT button twice continuously to play the
tracks in the current folder repeatedly and the LCD
display will show RPT ABM.
Press the RDM button to play all tracks in random or-
der, and the LCD will display RDM ON.
Press again to cancel this function, and the LCD will
display RDM OFF.
Press the radio preset button 6 and 5 button to move
up and down10 tracks at a time.
When the remained total tracks is lack of 10, the both-
buttons are inactively.
22. AUX INPUT JACK
Press the mode button to select auxiliary input
playing mode. You can connect anymatched ex-
ternal audio device to the auxiliary input jack. Use
the volume control to adjust volume.
23. USB SOCKET
When needing to play the file in the USB stick ,
insert the USB stick into the USB socket. The sys-
tem will change into the USB mode automatically,
and then play the first file in the USB .
- The main unit can only support the standard USB memory .
- USB MP3 player is not a standard which means different brand
name or different models have their own standard. So our
product cannot support all MP3 players.
- When connecting an MP3 player and it has a normal battery
in the player (non rechargeable battery), you shouldremove the
battery from the MP3 player then connect it to the USB inter-
face. Otherwise, it may cause battery burst.
- When in USB play mode, be sure not to remove the USB driver
from the USB interface.
24. MMC/SD CARD SLOT
When you need to play the file in the MMC/SD
card , insert the MMC/SD card into the MMC/SD
card slot . The system will change into the MMC/
SD mode automatically, and then play the first file
in the MMC/SD .
- When MMC/SD card and USB stick are both inserted into their
slot or socket, the system will change into the playback mode
of the latter one.
25. FLASHING LED
When the front control panel is removed this in-
dicator flashes
26. RESET BUTTON
Before operating the unit for the first time, or after
replacing the car battery or changing the connec-
tions. You must reset the unit.
Press this button with a cuspidal object. This
operation will erase the clock setting and some
stored contents.
27. REMOTE CONTROL SENSOR
ENGLISH
10 EN
BASIC
CAUTION !
When there are important files in the USB device, do
not connect it to the main unit to play. And our com-
pany assumes no responsibility