21
EN
Problem
Possible cause
Solution
The programme
display lights
are on, but not
blinking.
The silicone electrodes
are not in contact with your
skin.
Make sure that the pads are
positioned properly.
The microprocessor unit
has not been properly
secured to the pad.
Check whether the micropro-
cessor unit has been securely
attached to the snap fasteners.
The intensity has been set
to the lowest level.
Push
ON / HI
button in order to
increase the intensity.
The microprocessor unit is
not working properly.
Push
RESET
on the back of
the microprocessor unit with
a pointed object or turn the
device off. Take out the battery
for 1 minute and attempt to
restart the device.
The programme
display lights work,
but no pulses are
sent for muscle
stimulation.
The intensity level is too
low.
Push the
ON / HI
button to
increase the intensity.
The pad has not been put
on properly.
Shift the pad until you have
found the position with the
strongest muscle contraction.
Disposal
Dispose of the packaging in an environmentally-friendly manner and make it
available to the collection service for recyclable materials.
Dispose of the device in an environmentally-friendly manner at a recycling centre
for old electrical and electronic appliances. It does not belong in the household
garbage. More information is available at the administration in your community.
Before disposal of the device, the batteries must be removed and disposed of
separately. To protect the environment, batteries and rechargeable batteries must
not be disposed of together with normal household waste. Instead they must be
turned in at appropriate collection points. Be sure to observe applicable legal
regulations on battery disposal.
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650
(Calls to German landlines are subject to charges. The cost varies depending on the service
provider.)
All rights reserved.