DryBell Vibe Machine V-2, Руководство по настройкам

Страница: 4 / 18

DryBell Guitar Effects www.drybell.com Vibe Machine V-2, Options User’s manual, rev.1.4. 09/2018
BACK TO CONTENTS
DryBell
Doc. No. DM0958/ Page 4
3 SPEED POTENTIOMETER MARKS
Ok, let’s get started!

. In the pedal’s normal operation mode when nothing is connected to the PEDAL+ expression
jack the Speed potentiometer will only adjust speed. The Speed potentiometer has setting labels marked around it; E1 , E2 ,
E3 , S4 , S5 , S6 , X7 , T8 , T9 and T10 . All positions are utility positions but only positions T8 , T9 and T10 (used for Tap Tempo
multipliers) can be changed on the fly while using an external footswitch or expression pedal.
All positions E1, E2, E3, S4, S5, S6, X7, T8, T9, T10 are general utility positions for setting the 'set and forget'
parameters of the V-2 pedal, using two available utility modes: PEDAL+ mode and general SETUP mode, which will be
described later.
The name of each position is pretty logical. E positions are for setting the E xpression pedal modes, S positions are for
setting external S witch (footswitch) modes and T positions are for choosing T ap T empo multipliers on the fly. X7 is the
position used for utility modes and for maximum speed settings (or Leslie delay) when the pedal is operated in E2, E3 or S5
mode.
Figure 1. Speed potentiometer label
MAX MIN
E1
T10
E2
T9
E3 T8
S5
X7 S4
S6
EXTERNAL FOOTSWITCH MODES,
SETUP MODE LABELS
EXPRESSION PEDAL MODES,
SETUP MODE LABELS TAP TEMPO MULTIPLIERS,
SETUP MODE LABELS
NO PEDAL+ FUNCTION,
SETUP MODE LABEL,
SEE CHAPTERS 5.3, 5.4, 5.6
4 PEDAL+ JACK MODE AND SETUP MODE FUNCTIONS
The Vibe Machine V-2 has two different types of utility modes: the PEDAL+ jack modes ( Page 5 ) and general SETUP
modes ( Page 8 ). All these modes, described in detail later in this manual, are 'set and forget' features of the Vibe Machine
V-2.
When the user selects the PEDAL+ jack mode, the user defines whether an expression pedal or external footswitch is
connected to the PEDAL+ expression jack, and for which features this connected hardware will be used (external speed
control, Cancel mode, Tap Tempo mode, Fast/slow mode or Two speed mode).
With SETUP modes ( Table 2, Page 9 ) the user defines additional secondary settings and features embedded into the
V-2 hardware/firmware structure.
When we developed these modes we also embedded a Reset to Default Factory Settings Function ( Page 12 ) into the
V-2 system. This function resets all V-2 firmware settings to our factory settings, which we are pretty sure are the best
combination of settings for most guitarists and pedalboard builders.