clamp facing downward.
• Pull through to the end of the section to create
tension and roll upward, holding the iron hori-
zontally and wrapping the hair evenly around
the barrel.
• Hold for a few seconds, then holding the iron
vertically gently open and close the clamp and
pull downward to release the section.
• TIP: Taking smaller sections will create a tighter
curl pattern and larger sections will create a
looser curl pattern. Experiment with the size of
your sections until you find the perfect curl size
for you!
Waver:
• Section hair into clean, 3" (7.5 cm) sections.
• Hold the tool horizontally, press to open the clamp
and capture the top of the hair section between
the barrels and clamp.
• Release clamp and hold in place for several
seconds until desired definition is achieved.
• Open the clamp and move down the section.
Repeat until the whole section is waved.
• For a deeper, more defined wave, keep the section
clamped a few seconds longer.
Recommended Temperatures:
Fine/Damaged/Processed Hair: Up to 400°F (200°C)
Normal/Medium Hair: 410-420°F (210-220°C)
Thick/Coarse Hair: 430-450°F (220-230°C)