Page 3
For technical questions, please call 1-888-866-5797.
Item 63324
If Used on a Vehicle
13. If the utility pump is used on a vehicle, turn off the
ignition before making cable (17) connections.
14. Note the polarity of the vehicle’s electrical system.
Always connect the cable (17) on the utility
pump to the positive (+) side of the vehicle’s
12 volt DC electrical system. The black cable
goes to the negative (-) side of the system.
15. First c
onnect
the
red power cord
to the vehicle’s 12
volt DC electrical system,
Then, connect the black
power cord.
After that the pump’s the vehicle ignition
and pump’s power switch can both be turned on.
16. When
disconnecting
the power cords from
the electrical system, first turn off the pump’s
power switch and vehicle’s ignition, then
disconnect the black power cord next. Finally,
disconnect the red power cord last.
17. Before performing any inspection, adjustments,
maintenance, or cleaning procedures on the
pump, turn the ignition switch to its “off” position
and disconnect the utility pump from the vehicle’s
12 volt DC electrical system as outlined above.
18. DO NOT SUBMERGE THE
UTILITY PUMP IN WATER.
19. People with pacemakers should consult
their physician(s) before using this product.
Electromagnetic fields in close proximity to
a heart pacemaker could cause interference
to or failure of the pacemaker.
Fluid Type
The Pump is designed for use with water with a maximum temperature of 120° F (49°C).
Do not use the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products.
