Page 3
For technical questions, please call 1-888-866-5797.
Item 58029 58030
Specifications
Model
58029
58030
Rated HP
3/4 HP
1/2 HP
Electrical Rating
115
VAC
/
60
Hz
115VAC
/
60
Hz
Amperage
11.0 A
9.0 A
Power Cord Length
10 ft
10 ft
Maximum Flow @ 0'
5400 GPH
4400 GPH
Maximum Head Lift
@ 0 GPH Flow
40 ft.
35 ft.
Discharge Port
1-1/2
″
NPT
1-1/2
″
NPT
Installation
The submersible motor pump must be installed in a stationary position with either:
a. A fixed pipeline or
b. A flexible hose pipe.
Please note!
1. Do not install the pump by suspending it
unsupported from its delivery pipe or power cord.
The pump must be suspended from the handle
or be placed on the bottom of the basin.
To ensure that the pump works properly,
keep the bottom of the basin free from
sludge and dirt of all kinds.
2. If the water level sinks too low, any sludge in the
basin will dry out and stop the pump from starting.
To help ensure the pump will start as required,
check the pump regularly with start-up tests.
Power Supply
1. The pump is equipped with a shock-
proof plug according to regulations. The
pump is designed to be connected to a
120
VAC, 60
Hz GFCI protected socket.
2. Make sure that the socket is sufficiently
secured and is in excellent condition.
3. When the plug is inserted into the socket,
the pump will be on standby.
4.
WARNING: To prevent death from electric
shock , pump must be connected only to
a GFCI protected outlet.
WARNING! TO PREVENT SERIOUS INJURY:
If the power cord or plug is damaged, do not
use the pump. The power cord or plug may
only be repaired by a certified electrician.
Areas of use
1. This pump is designed to be used for:
• Removing ground water from
basements and crawlspaces.
• Pumping grey water residential systems.
2. This pump should NOT be used for:
• Continuous run, fountain/pond water features.
• Removing water from swimming pools or spas.