Drummond 58029 Скачать руководство пользователя страница 2

Page 2

For technical questions, please call 1-888-866-5797.

Item 58029 58030

Before start-up, note the following:

The pump must be connected to a GFCI protected plug which has been installed according 

to regulations.  The plug must have a supply voltage of 115

VAC at 60

Hz.

WARNING

IMPORTANT!  For your own safety – 

before starting to run the pump, please have 

the following items checked by an expert:

1.  Risk of electric shock – This pump is supplied 

with a grounding conductor and grounding-type 

attachment plug.  To reduce the risk of electric shock, 

be certain that it is connected only to a properly 

grounded, grounding-type receptacle.

2.  Risk of electric shock – This pump has not been 

investigated for use in swimming pool areas.

3.  This pump has been evaluated 

for use with water only.

4.  The electrical connections must be 

protected from moisture.

5.  If there is danger of flooding, the electrical 

connections must be taken to higher ground.

6.  Circulation of caustic fluids, as well as the circulation 

of abrasive materials, must be avoided at all costs.

7.  The pump must be protected from frost.

8.  The pump must be protected from running dry.

9.  Access by children should also be 

prevented with appropriate measures.

10. 

To prevent death from electric shock, 

pump must be connected only to a GFCI 

protected outlet.

11.  Do not use an extension cord with this item.

12. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.

13. The warnings, precautions, and instructions 

discussed in this instruction manual cannot cover all 

possible conditions and situations that may occur.   

It must be understood by the operator that 

common sense and caution are factors 

which cannot be built into this product, but 

must be supplied by the operator.

Fluid Type

The Pump is designed for use with water with a maximum temperature of 95° F (35°C).  Do not use the pump 

for other fluids, especially not fuels, cleaning fluids, or other chemical products.

Содержание 58029









Отзывы: