4
English
P R O N T O
-
I N S T R U C T I O N
F O R
I N S TA L L AT I O N
3.
Safety
3.1
General
Caution
-
Carefully read this chapter on safety, before you start performing installation or maintenance work;
Please observe the general regulations and the precautions/safety instructions in this manual.
3.2
Regulations
Please install the appliance in accordance with the applicable national, local and constructional (installation) regu-
lations.
3.3
Precautions / safety instructions during installation
Carefully follow the following precautions/safety regulations:
➠
you should only install and maintain the appliance if you are a competent installer in the fi eld of atmospheric gas hea-
ting:
➠
do not make any changes to the appliance;
➠
only use the fl ue gas discharge / combustion air supply system supplied by DRU;
➠
suspend the appliance from a wall of incombustible and heat resistant material
➠
take into account the minimum required free space of 500 mm at both sides of the appliance, as well as above the ap-
pliance for the benefi t of the appliance’s heat discharge.
➠
suspend the appliance at least 300 mm above the fl oor;
➠
mount the appliance using the wall bracket supplied;
➠
do not cover the appliance and the discharge material and/or do not wrap it in an insulation blanket or any other ma-
terial;
➠
make sure that combustible objects and/or materials have a distance from the appliance of at least 500 mm;
➠
only ever use the supplied wood set;
➠
place the wood set exactly as described;
➠
make sure the pilot burner and the space around it is kept free;
➠
avoid dirt in gas pipes and connections;
➠
place a gas tap under the appliance
➠
check the connections for gastightness before using the appliance;
➠
use heat resistant electrical connectors;
➠
place the electrical connectors in such a way that they are free from the appliance;
➠
replace torn or broken panes;
➠
do not ignite the appliance until it is fully installed.
4. Instructions
Observe the following items during installation in order to guarantee a proper and safe operation of the appliance:
➠
avoid that the ignition cable runs over the receiver;
➠
avoid that the ignition cable touches or crosses the antenna;
➠
avoid that the ignition cable runs over and/or alongside metal parts, in order to prevent weakening of the spark;
➠
avoid damaging the panes during removal/placing;
➠
clean the panes before you use the appliance, in order to prevent dirt from burning in the glass.
5.
Removing the packaging
Note the following items when removing the packaging:
➠
Check the appliance for damages during transport.
➠
If necessary, contact DRU Service.
Follow the procedure below when removing the packaging:
➠
Remove the top box
➠
Remove the decorative frames and the front pane (see section 6.9.1.1)
➠
The appliance can now be set up straight by lifting the top side
➠
For suspending the appliance, see section 6.4
U K
95901302UK Install_G20.indd 4
95901302UK Install_G20.indd 4
2-2-10 14:28
2-2-10 14:28