Parachute Manual DRS-M210-V2
©2020 Drone Rescue Systems
18/27
Loading and unloading the parachute
First open the release mechanism of the
, which is the small shutter at the
bottom. The easiest way to do so is to get
underneath the shutter using your fingernail
and lift it to the stop. When lifted, place the
on a flat surface and keep the shutter
in this position.
Use a solid object which fits the inner diameter
of the
unit. A plastic pipe is very convenient, but a
small bottle of water works as well. Use it to
gently push down the deployment mechanism
until it reaches the bottom position. While
holding this position, release the shutter. Now
slightly decrease the pressure on the
deployment mechanism until the shutter snaps
into place.
Gently push the shutter back in place until it
does not stick out of the container tube.
Caution:
In case the shutter is not fully back in place or
is manually pulled out, the parachute will get
deployed and might cause injuries or damages!
