9
Chlorine free
Lubricating properties, anti-wear coolant
Mineral oil-free
There is no water to be recycled.
Reduces waste to dispose of and lowers consumption
For applications with:
Minimal lubrication systems
General cutting operations of high/medium severity
Use on ferrous and non-ferrous materials
In case oils other than those recommended by
DropsA
S.p.A.
are used, they must belong to group 2 according to the
PED Directive, and must be a non-hazardous mixture according to agreements (EC)1272/2008 [GHS], with the
following physical characteristics:
Viscosity:
<50 cSt 40
°
Density:
918 Kg/m
3
15 °C
Flashpoint:
>250 °C
For the disposal of the oil, strictly adhere to local provisions and the related MSDS (Material Safety Datasheet).
DANGER
The lubricant used in the lubrication
circuits is a fluid that is flammable at
temperature>250°C. Prevent it from
coming into contact with very hot parts or
naked flames
CAUTION
During oil filling operations use protective glasses and gloves to avoid direct contact
with lubricant.
