FULL USER MANUAL
GANNET 2+ / MAX +
23
22
Status Bar
1.
Bluetooth
2.
Signal
3.
SIM card status (without sim card in the picture)
4.
Power lever
5.
Back ground management
6.
Home
7.
Return
1 2 3 4 5
6
7
8
Q & A
1. Can the remote control install other apps?
The permissions of the remote control are all open, and there is no special
software or restricted software installation and uninstallation.
2. Data transmission/telemetry cannot be connected
Check whether the ground station is connected with UDP type to connect to
the TX and whether the listening port is 14551. Check whether the baud rate is
normal. Check if RX and TX is connected reversely (connect RX to TX, TX to RX
correctly)
3. The remote control keeps beeping.
When the remote control is not successfully connected with the receiver, the
remote control will always send out a prompt alarm.
4. The QGC sound is too low to hear
Vol+/Vol- in setting
5. How many ways to connect the remote control to the network
By SIM card or Wi-Fi
6. How to download maps to use in Skydroid app offline.
Go to settings in Remote and connect to your home Wi-Fi. Then open Google
maps and in map settings download your area maps. Skydroid will then access
these maps offline when at the beach.
Maintenance, servicing
Storage after not using for certain period
Put H16/H16 Pro in a dry and ventilated area. No direct sun light to prevent
harm to the internal li-ion battery. If storing it for over three months, it is highly
recommended to put in room temperature between 22º to 28º. DO NOT put it
below 20º or higher than 45º
