FULL USER MANUAL
GANNET 2+ / MAX +
21
20
Remote Controls
Skydroid H12/H12 PRO Controller
Attention
This product uses the following terms to classify the potential hazards that may
be caused by improper operation.
Note:
If not follow the instructions, it may cause property damage and minor
injuries.
Note:
If not follow the instructions, it may cause property damage, major
accidents and serious injuries.
Warning: Misuse of this product may result in injury, damage or loss of property.
Read the manual carefully before using this product. This item is not
a toy. This item is intended for use by professional UAV operators and
installers only. Do not use this product if you lack the knowledge and
expertise to install and maintain UAV radio equipment. Do not use
unapproved or unofficial components with this system. Operators must
strictly follow the operation guides set forth in this manual. Skydroid
does not accept any liability for the use or misuse of this product.
Overview
I. Product Features
The H12 series uses newest Qualcomm Snapdragon 625 processor,
equipped with an Android embedded system and advanced SDR technology
and super protocol stack, making the image clearer, lower the latency, longer
distance, stronger anti-infection, whether it is drones, robots, industrial
control equipment, etc. can be applied
II. Main applications
It is used to remotely operate helicopters, fixed wings, multi-rotors, vehicles,
ships, etc. for video/image transmission (camera optional), data transmission,
telemetry, and control drone flight.
III. The composition of the model and its significance
No.
Annotation
No.
Annotation
1
2.4G 3dB antenna
10
Button B /Payload Release
2
Flight Mode Switch
Switch E
11
Stick X2/Y2
3
Camera UP/Down
Thumbwheel Gannet II/II+
12
Button D
4
Button C
13
Camera UP/DOWN Thumbwheel on
Max II+ only
5
Stick X1/Y1
14
Toggle 3 position switch F
6
5.5inch screen
15
Speaker
7
MIC port
16
SIM card slot
8
Button A / RTH
17
Charging port
9
Power switch ON/OFF
18
PPM output
