Drolo Stamme[n], Руководство пользователя

Страница: 2 / 4

Connecting and powering:
The power supply needs to be 9V/60ma center negative like the common BOSS type power supplies:
Make sure the polarity of your power supply is correct or it will damage the pedal. D o NOT run at higher
voltages.
As the pedal uses a digital processor operating at high frequencies, you may hear some high pitched noise if
you use it together on the same power supply with other pedals (daisy chained) even when it is bypassed. The
noise can bleed through the power supply into the other pedal’s signal. This is normal for such devices. It
might not be the case in your particular setup but if you notice that, I would suggest using an isolated power
supply.