Drolet DB03102 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 60

background image

Installation and Operation Manual for Escape 1800

8.2.1 Factory-built Metal Chimneys

These are sometimes referred to as ‘high
temp’  chimneys  because  they  have  the
special  characteristics  to  withstand  the
temperatures  that  can  be  created  by
wood

burning

stoves.

Factory

chimneys are tested as a system with all
the

necessary

components

installation.  The  instructions  provided
with the chimney by its manufacturer are
the  only  reliable  source  of  installation
guidelines.  To  be  safe  and  effective,  the
chimney  must  be  installed  exactly  in
accordance  with  the  manufacturer’s
instructions.  Use  only  components
intended  for  the  brand  and  model  of
chimney

you

are

using.

Never

substitute parts from other chimney
brands

or

fabricate

your

own

components. The chimney must be a
type suitable for solid fuel.

8.2.2 Factory-built Metal Chimneys in

mobile homes

For use in a mobile home, this
be  connected  to  a  6”  in  diameter
wall  factory  built  chimney  conforming  to
CAN/UCL-S629,  Standards  for  650°C
Factory-built chimney. The total length of
the  flue  system  should  be  at  least
feet including elbows, from the top of the
stove.

To  maintain  an  effective  vapour  barrier
insulation and waterproof at the chimney
and  outside  flue  pipe,  install  a  mobile
home  roof  flashing  and  seal  it  with
silicone.

Installation and Operation Manual for Escape 1800

built Metal Chimneys

These are sometimes referred to as ‘high
temp’  chimneys  because  they  have  the
special  characteristics  to  withstand  the
temperatures  that  can  be  created  by
wood

burning

stoves.

Factory-built

chimneys are tested as a system with all
the

necessary

components

for

installation.  The  instructions  provided
with the chimney by its manufacturer are
the  only  reliable  source  of  installation
guidelines.  To  be  safe  and  effective,  the
chimney  must  be  installed  exactly  in
accordance  with  the  manufacturer’s

e only components

intended for the brand and model of
chimney

you

are

using.

Never

substitute parts from other chimney
brands

or

fabricate

your

own

The chimney must be a

built Metal Chimneys in

stove is to

in diameter double

factory built chimney conforming to

S629, Standards for 650°C

. The total length of

system should be at least (12)

from the top of the

To maintain an effective vapour barrier,

at the chimney

install a mobile

home roof flashing and seal it with

37

«
...
35
36
37
38
39
...
»

Содержание DB03102





























































Отзывы:

Нет отзывов

Похожие инструкции для DB03102

Бренд: ADURO Страницы: 32

Бренд: Westbo Страницы: 10

Бренд: Bronpi Страницы: 34

Бренд: Pacific energy Страницы: 16

Бренд: GABRIEL KAKELUGNAR Страницы: 28

Бренд: D'Alessandro Termomeccanica Страницы: 29

CINEA Pellets Stove

Бренд: ZANTIA Страницы: 84

Бренд: Aarrow Страницы: 28

Бренд: Blaze King Страницы: 52

Бренд: Harman Stove Company Страницы: 20

805804320-894435141

Бренд: Palazzetti Страницы: 16

Бренд: Vogelzang International Страницы: 20

Бренд: Vigan Mammoth Страницы: 20

Бренд: Nordica Страницы: 64

Бренд: EASYSTEAM Страницы: 28

Бренд: Charnwood Страницы: 17

Бренд: Charnwood Страницы: 20

Бренд: Charnwood Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды