background image

Page 53

Installation and Operation Manual - Columbia II

ENGLISH

DROLET LIMITED LIFETIME WARRANTY

DROLET LIMITED LIFETIME WARRANTY

The warranty of the manufacturer extends only to the original retail purchaser and is not transferable. This warranty 
covers brand new products only, which have not been altered, modified nor repaired since shipment from the factory. 
Proof of purchase (dated bill of sale), model name and serial number must be supplied when making any warranty 
claim to the DROLET dealer.  

This warranty applies to normal residential use only. This warranty is void if the unit is used to burn material other 
than cordwood (for which the unit is not certified by EPA) and void if not operated according to the owner's manual. 
Damages caused by misuse, abuse, improper installation, lack of maintenance, over firing, negligence or accident 
during transportation, power failures, downdrafts, venting problems or underestimated heating area are not covered 
by this warranty.  The recommended heated area for a given appliance is defined by the manufacturer as its capacity 
to maintain a minimum acceptable temperature in the designated area in case of a power failure.

This warranty does not cover any scratch, corrosion, distortion, or discoloration. Any defect or damage caused by 
the use of unauthorized or other than the original parts voids this warranty. An authorized qualified technician must 
perform the installation in accordance with the instructions supplied with this product and all local and national 
building codes. Any service call related to an improper installation is not covered by this warranty.

The manufacturer may require that defective products be returned or that digital pictures be provided to support the 
claim. Returned products are to be shipped prepaid to the manufacturer for investigation. Transportation fees to ship 
the product back to the purchaser will be paid by the manufacturer. Repair work covered by the warranty, executed 
at the purchaser’s domicile by an authorized qualified technician requires the prior approval of the manufacturer. All 
parts and labour costs covered by this warranty are limited according to the table below.  

The manufacturer, at its discretion, may decide to repair or replace any part or unit after inspection and investigation 
of the defect. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty 
by refunding the wholesale price of any warranted but defective parts. The manufacturer shall, in no event, be 
responsible for any uncommon, indirect, consequential damages of any nature, which are in excess of the original 
purchase price of the product. A one-time replacement limit applies to all parts benefiting from lifetime coverage. This 
warranty applies to products purchased after March 1

st

 2019.

DESCRIPTION

WARRANTY 

APPLICATION*

PARTS

LABOUR

Combustion chamber (welds only) and cast iron door frame.

Lifetime

3 years

Surrounds, heat shields, ash drawer, steel legs, pedestal, trims (aluminum extrusions), 
plating (defective manufacture**), and convector air-mate.

5 years

3 years

Removable stainless steel combustion chamber components, secondary air tubes**, 
deflectors, and supports.

5 years

N/A

Glass retainers, handle assembly, and air control mechanism.

3 years

1 year

Carbon steel combustion chamber components, vermiculite baffle**, and C-Cast baffle**.

2 years

N/A

Standard blower, heat sensors, switches, rheostat, wiring, and other controls.

1 year

1 year

Optional blower, paint (peeling**), ceramic glass (thermal breakage only**), ceramic fibre 
blankets, gaskets, insulation, and other options. 

1 year

N/A

Firebricks. 

N/A

N/A

All parts replaced under the warranty.

90 days

N/A

*Subject to limitations above.     **Picture required.

Labour cost and repair work to the account of the manufacturer are based on a predetermined rate schedule and 
must not exceed the wholesale price of the replacement parts. Shall your unit or a component be defective, contact 
immediately your DROLET dealer. To accelerate processing of your warranty claim, make sure to have on hand the 
following information when calling:
•  Your name, address and telephone number; 
•  Bill of sale and dealer’s name;
•   Installation configuration;

•   Serial number and model name as indicated on the 

nameplate fixed to the back of your unit;

•  Nature of the defect and any relevant information.

Before shipping your unit or defective component to our plant, you must obtain an Authorization 

Number from your DROLET dealer. Any merchandise shipped to our plant without authorization will be 

refused automatically and returned to the sender.

Содержание COLUMBIA II

























































Отзывы: