Welcome to CarChip
31
1.
Select Enable CarChip LED from the CarChip menu.
The CarChip software takes a moment to initialize the LED setting. The CarChip LED is now in
Diagnostic Mode.
2.
Select Enable CarChip LED a second time.
The CarChip software take a moment to initialize the LED setting. The CarChip LED is now in
Disabled Mode.
To view CarChip LED status:
1.
View Enable CarChip LED from the CarChip menu.
If a check displays next to the command, Diagnostic Mode is currently in use on your CarChip. If a
check does not display, Disabled Mode is currently in use.
CarChip LED Modes
The CarChip can be toggled between two LED Modes: Diagnostic and Disabled.
Diagnostic Mode
Diagnostic Mode enables the LED in the following manner:
Self-test Mode - Displays three rapid blinks, indicating the initial hardware self-test was completed
successfully.
Communications Mode - Displays two rapid blinks per second until the CarChip successfully begins to
communicate with a vehicle.
Data Mode - Displays one blink per second while the CarChip is communicating with a vehicle.
Sleep Mode - Does not display any blinks.
PC Mode - Displays one blink per second whenever CarChip is connected to a PC. LED is 100% ON when
downloading to a PC.
Disabled Mode
When the CarChip LED is disabled only the Self-test and PC modes are active.
Self-test Mode - Displays three rapid blinks indicates the initial hardware self-test was completed
successfully.
PC Mode - Displays one blink per second whenever CarChip is connected to a PC. LED is 100% ON when
downloading to a PC.
Reset Check Engine Light
The Reset Check Engine Light command enables your CarChip data logger to turn off the Check Engine
light in your vehicle the next time the CarChip data logger is connected to your vehicle.
Note: If the condition that caused the check engine light to appear has not been corrected, the light
reappears the next time the car detects the condition.
To turn the Reset Check Engine Light command on and off:
1.
Select Reset Check Engine Light from the CarChip menu.
The CarChip software takes a moment to initialize the setting. The Reset Check Engine Light is now
turned on.
2.
Select Reset Check Engine Light a second time.
The CarChip software take a moment to initialize the setting. The Reset Check Engine Light is now
turned off.
To view Reset Check Engine Light status:
1.
View the Reset Check Engine Light command from the CarChip menu.
If a check displays next to the command, the command is turned on. If a check does not display,
the command has been turned off.
Содержание CarChip
Страница 4: ......
