DriveRight 8156OBD, Руководство по установке

Страница: 5 / 16

3
Installations using Adapter Cable Digital Inputs
If you are using the adapter cable digital inputs in your installation, the
following additional tools and other items may also be required:
• Cr imping Tool
• Multimeter
• Fuse Tap - Required to 12 V from the fuse panel.
Planning the Installation
The installation for DriveRight OBD is very simple. Unless you are
using the two digital inputs on the adapter cable, you only need to plug
the OBD cable into your vehicle’s OBDII port and then install the Driv-
eRight console.
The digital inputs on the DriveRight 600 adapter cable may be used to
monitor any 12 VDC electrical device or accessory in the vehicle, but
they are typically used to monitor the brake lights, headlights, or seat
belts.
To install DriveRight OBD:
1. Plug the OBD cable into your vehicle’s OBDII port.
2. Connect the digital inputs (if used; DriveRight 600 only).
3. Install the DriveRight console in the vehicle.
4. Test the DriveRight installation.