DriveRight 8156OBD, Руководство по установке

Страница: 11 / 16

9
Sun Visor Mounting
2. Insert the battery into the DriveRight console.
3. If you are installing a DriveRight 600, connect the DriveRight con-
sole cable to the adapter cable. If you are installing an earlier model
of DriveRight, connect the console cable directly to the OBD cable.
It is easiest to make the connection by first holding the OBD cable
connector or adapter cable connector by the housing. Then hold the
console cable on the cable itself next to the sliding connector hous-
ing and push the two connectors together. The two cables will lock
together when properly connected.
Note: To disconnect the cables, hold the both cables by the connector housing and pull
apart. The sliding housing on the console cable connector will release the lock
and allow the cables to be separated.
3 Bumps
(to hold clip)
OR
Visor Clip