9
www.driventalks.com
BHF 2000S User Manual v1.0
Contact:
T . +82.70.7547.7502 F. +82.2.501.1851
Default is tou ch mode. The Touch sensor key p ad icon will be turned on when Touch
mode. In o rder to switch gesture sensing mode, press the MFB and the Mode button
together for 3 seconds. You will hear the announcement “Gesture sensing mode”, and
it will change mode. The DEVICE will remem ber it s last setting mode wh en turnin g
back on.
4.2 Answering/Ending a call
Answer a call
: Tap the MFB on your DEVICE to answer a call.
End a call
: Press the MFB on your DEVICE to end an active call.
4.3 Making a call
Using your mobile phone
Call will automatically transfer to your DEVICE
*
. If it does n ot, please press and hold the MFB for 5
seconds on the DEVICE.
Via your DEVICE
You can place a call with the DEVICE in following ways:
1) Call favorite
Tab the MF B or sa y “H ello, DriveNTalk” when th e vo ice trigger is on. When ‘S ay a command’
message is heard, say any Call favorite. You can choose amongst 7 Call favorites ‘Call home, call
office, Call favorite 1~5”. The DEVICE will dial the number saved on each Call favorite numbers.
!NOTE
Refer to ‘4.8 Setting’. You can save numbers you want on each call favorite numbers.
2) Redial last number
•
With the DEVICE
Press and hold the MFB for 3 seconds When the DEVICE is connected to your mobile phone.
•
Us ing Voice Command
Tab the MF B or sa y “H ello, DriveNTalk” when vo ice trig ger is on. W hen ‘Sa y a co mmand’ i s
heard, say ‘Redial’. The DEVICE will redial the last outgoing number.
4.4 Volume control
4.4.1 Volume Up
1. Slide your finger to the right on the touchpad.
