This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2013) Drivecon. All rights reserved.
n
Make sure that the user is not under the influence of drugs, alcohol and medicines.
n
Allow only qualified personnel to have access to the transmitter and operate the equipment.
n
Make sure that the user does not leave the transmitter unsupervised.
n
Make sure that the user always turns the transmitter off when not in use.
n
Make sure that the user keeps a good overview of the work area.
MAINTENANCE
n
Use the stop button to start and turn off the transmitter as often as possible.
n
When error messages are shown, it is very important to find out what caused them.
n
If the stop button is mechanically damaged, contact your representative for service immediately.
n
Always contact your representative for service and maintenance work on the product.
n
Write down the serial numbers of the receivers and transmitters used. This information should
be recorded on the “Settings document” for your product (download from our website).
n
Avoid registering transmitters to receivers where it is not being used.
n
Keep the safety instruction for future reference. Always download the configurations instruction
from our web site for the latest version available.
5
