This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2013) Drivecon. All rights reserved.
CHAPTER 1: CUSTOMER INFORMATION
THANK YOU FOR PURCHASING A DRIVECON PRODUCT
READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE MOUNTING, INSTALLING
AND CONFIGURATING THE PRODUCTS.
These instructions are published by Drivecon without any guarantee. The instructions may be removed or
revised by Drivecon at any time and without further notice. Corrections and additions will be added to the
latest version of the instruction.
IMPORTANT! These instructions contain a separate chapter directed towards end users. The chapter
can be printed and handed to end users. The instructions that contain information on the installation
and configuration of the radio remote control unit on the machine are not intended to be passed on to
the end user. Only such information may be passed on to the end user that is needed to operate the
machine correctly by radio remote control.
Drivecon
820 Lakeside Drive
Gurnee, IL 60031
WARNINGS & RESTRICTIONS
NOTE! We recommend that the functionality of the STOP button is being tested at a regular basis: At a
minimum, when used for 200 hours. Test the STOP button by pressing it and pulling it out.
INSTALLING, CONNECTING AND MOUNTING
n
Allow only licensed or qualified personnel to install the product.
n
Switch the power supply off to the receiver before connecting the equipment.
n
Check that you have connected the power supply to the correct connection terminal.
n
To utilize the safety of the system, use the stop relays in the safety circuitry of the object that you
want to control.
n
Use undamaged cables. No cables should hang loose.
n
Avoid installing in areas affected by strong vibrations.
n
Place the receiver well away from wind, damp and water.
n
Cable glands and vent plugs must face down to prevent water from seeping in.
THE USER
n
Make sure that the user is following the instructions.
n
Make sure that the user has reached the certified age of your country to operate the equipment.
4
