Affix the front basket to the bracket on the front
of the scooter’s tiller
Screw the rearview mirrors directly into the
receptors at the top of the product’s control
panel.
Affix the headrest to the top of the seat by
inserting the headrest posts into the holes in
the top of the seat.
Insert and tighten the included star knobs to lock
the armrests into place at the desired width.
9.
10.
11.
12.
Fully charge the scooter’s batteries by inserting the round charger connector into the battery charging
terminal on the scooter’s control panel and inserting the 3-pronged plug into a standard electrical outlet.
Ensure that the 115V/230V switch on the product’s battery charger is set to 115V. If the switch is set to 230V, the
scooter will not charge properly.Fu ll charging normally takes 6-8 hours, but can take as many as 10 hours
depending on the batteries’ charge level when starting and the ambient temperature.
13.
Osprey Quick Start Guide
READ BEFORE UNPACKING
This Quick Start Guide offers basic information on initial product
setup only. Read the owner’s manual and all supplemental
information thoroughly before operating the product for
information on safety, battery charging, basic operation, comfort
adjustments, disassembly and care and maintenance.
NOTE: The illustrations provided may not reflect your actual unit.
READ
THIS
FIRST!
