background image

Unit

Mattress overlay

Environmental parameters

Power supply 

230 V / 50 Hz

 

Protection class 1; IPX0;

 

Type BF, AP/APG NO

Dimensions   200 x 90 x 14 cm without

 

foam pad

Temperatures  

 

Operation 

10 – 35°C

Storage 

-15 – 50°C

Shipment 

-15 – 70°C

Power consumption

 

Max. 12 watts

Cells  

Nylon/PU; 17 cells of which 9

 

are air flow cells, 3 are static 

 

head cells

Relative humidity 

 

Operation

 

20 – 80% => non-condensing

Storage

 

10 – 90% => non-condensing

Weight 

2.2 kg

Cell height   13 cm

Dimensions  

28 x 10 x 20 cm

Cover  

Nylon/PU, breathable, washable

Pressure range 

30 - 60 mbar

Max. load 

36 - 150 kg

Specifications

1

1

2

2

3

3

5

6

4

4

5

6

7

7

8

9

9

10

10

11

12

11

13

8

Type label

1.  Product name
2.  Article number 
3.  Serial number
4.  Production date year/month
5.  Do not dispose of in 

household waste

6.  Follow the instructions for use
7.  CE marking
8.  Do not dry in dryer
9.  Do not iron
10.   Wash in a normal wash cycle 

up to a temperature of 60°C

11.  Do not bleach

1.  Product name
2.  Article number 
3.  Serial number
4.  Production date year/month
5.  Voltage
6.  DIN standard
7.  Follow the instructions for use
8.  CE marking
9.  Type BF
10.  Protection type
11.  Protection class 1 and 2
12.  Do not dispose of in 

household waste

13.  Important

Service life

Our company assumes a long service life for this product as 
long as the product is used as intended and all maintenance 
and service requirements are observed.
This service life can be significantly prolonged if the product 
is carefully handled, maintained, cared for and used.

The service life may also be significantly shortened through 
extreme and improper use, however. 
Determination of the service life by our company does not 
represent any additional guarantee.

Subject to error and change Last 
updated:  01.07.2019  

Manufacturer: Drive Medical GmbH & Co. KG • Leutkircher Straße 44 • D-88316 Isny/Allgäu • Germany • [email protected] • www.drivemedical.de • Tel.: +49 (0) 7562 

9724-0 • Fax: +49 (0) 7562 9724-25 

Distributor: DeVilbiss Healthcare GmbH • Kamenzer Straße 3 • D-68309 Mannheim • Germany • [email protected] • www.drivedevilbiss-int.com • Tel: +49 (0) 621 

17898-0 • Fax: +49 (0) 621 17898-111 

Содержание DeVilbiss Med Aire DuoWave









Отзывы: