lifetime limited
warranty
Your Drive branded product is warrantied to be
free of defects in materials and workmanship for
the lifetime of the product for the original con-
sumer purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This Lifetime
Limited Warranty is an expression of our confi-
dence in the materials and workmanship of our
products and our assurance to the consumer of
years of dependable service.
This warranty does not cover device failure
due to owner misuse or negligence, or normal
wear and tear. The warranty does not extend to
non-durable components, such as rubber
accessories, casters, and grips, which are subject
to normal wear and need periodic replacement.
If you have a question about your Drive device or
this warranty, please contact an authorized Drive
dealer.
© 2014 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
1. Remove product from carton and READ ALL INSTRUCTIONS
CAREFULLY before attempting to install product.
2. To install arms, depress push pins on arm and insert into
mounting tubes. There will be an audible click. Ensure the push
pins fully protrude through the holes in the mounting tubes.
Make sure arms are locked in place by pulling them. To remove
arms, reverse steps.
3. Lift toilet lid assembly and place rear wings of toilet seat
around rim of toilet bowl. (Some toilet bowls may require that
seat assembly be removed to allow proper fit.) In addition the
front adjustment bracket must clear the rim in order for the
raised toilet seat to fit securely.
4. With raised toilet seat resting correctly on rim, straighten
and center product over toilet bowl as necessary. Turn adjust-
ing knob clockwise to tighten product securely in place. Hand
tighten only - use no tools, and be careful not to over-tighten,
as threads on adjustment bracket may strip.
5. Check for secure fit routinely before using product. User’s
weight should be centered over toilet seat, not too far forward
or too far to one side, as unit may tip.
6. If you have a style of commode where this product will not fit
properly, or cannot be tightened securely as noted above, it is
recommended that you discontinue usage.
CAUTION
1. Always be sure that the seat is correctly and securely
locked in place before using.
2. Be sure that the adjustment knob in front of the seat is tight
at all times, thus securing the seat to the toilet bowl.
3. This product is designed for use with the most common
types of commodes. It will not fit all commode types; be
sure that the unit is correctly installed, fits properly and is
stable before use.
4. On models with arm rests: The arms are for the purpose of
providing assistance when getting on and off the seat. DO
NOT try to use the arms to support full body weight during
transfer, as this may result in failure of the unit.
installation instructions
removal instructions
1. Rotate knob counter clockwise until seat is loose.
2. Lift front of raised toilet seat and pull forward to move.
cleaning instructions
1. Use a non-abrasive detergent or household cleaner with
warm water.
2. Rinse with warm water and wipe dry.
3. DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this
product, as damage may ensue.
Weight capacity: 300 lbs (136 Kg)
Rev.2.02.26.14
