Drive Medical Wallaby Скачать руководство пользователя страница 4

Страница: 4 / 12

Cautions (con’t)

TRANSFER

- Work with a qualified professional before you transfer on your

own as it is dangerous. Engage rear wheel locks before you transfer and the

chair should be on a smooth, stable and level area. Move your chair as close

as you can to the seat you are transferring to, rotate the front casters until

they are as far forward as possible, make sure armrests are out of the way and

remove or swing footrests out of the way if you can. Do not stand or apply

weight to footrest.

SEAT BELT RESTRAINTS

- Belt restraints should fit securely across the front

of user’s body and not around wheelchair components or parts (such as;

armrest or wheel) Upper torso belts should fit over shoulders.

Figures 2 and 3 shows the improper and proper positioning of restraint belts.

Restraints should not be held away

from body by wheelchair components

Pelvic restraints should make full

contact across the front of the body

near the junction of the thigh and

pelvis

IMPROPER POSITIONING OF OCCUPANT RESTRAINTS (FIG 1)

PROPER POSITIONING OF PELVIC BELT (FIG 2)

FIG 1

FIG 2

Содержание Wallaby











