User should be sitting in wheelchair with feet on the foot plates when
adjusting length &/or angle of leg rests.
ADJUST LENGTH
—Lift black tab (A) and depress both push pins (B) (Fig 9).
Raise or lower foot plate to proper position for maximum support of thighs.
Leg rests shouldn’t be lower than 2.5” from the ground to ensure clearance.
Proper length is important so as not to cause pressure on user’s thighs at the
front of seat.
ADJUST ANGLE
— Lift foot plate on leg rest assembly to desired position.
Release leg rest assembly and it will automatically lock into place. To lower,
push out on leg rest lever and lower foot plate to desired position.
The calf pads can be raised or lowered by turning the calf pad until the
bracket is released of the pin
To remove leg rest, release lock by pushing on the front rigging lever. Swing
leg rest out and sideways and then lift to remove.
Elevating Leg Rests – Item # WB ELR
Fig 9
A
B
